Storage and recall module

The Storage Strip allows for saving and recalling settings within supported modules.

Currently supported modules: Mungo 0 series modules, WMD Sequential Switch Matrix

Future supported modules: Make Noise CTRLSEL series and all Macro Machines modules

Mungo specific features: The Storage Strip replaces the functionality of the Mungo zoom switch with a 2 button system for Zoom In and Zoom Out.

Zoom In doubles as a save button. Pressing Zoom In along with a setting button saves to that location.

Zoom Out doubles as a bank selection. Pressing Zoom Out and then a setting button will change to that bank (1-4).

You can manually change through settings using the lower 4 buttons. There are 4 banks of 4 for 16 total settings.

To select clocking mode press both top buttons together.

There are 4 clocking modes: forward, reverse, pendulum and random. Clocking can be switched between 4 step and 16 step mode. All sequencing mode selection is saved to EEPROM so it is always recalled even after powering down your case.

Pre-order here : http://www.muffwiggler.com/forum/viewtopic.php?p=1449713

http://www.macromachines.net

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 43 mm Depth

No info about availability.