Voltage Controlled Envelope Generator

Summary

Voltage controlled envelope generator (EG) for Eurorack systems. It allows voltage control of A, D, S and R and has manual controls on the front panel. This EG outputs linear or exponential curves in gate mode or triggered mode and has a re-triggerable gate.

Features

• CVs for ADSR sections. Standard 0 to 10V but small negative voltages will shorten the A,D and R times
• Linear/Exponential
• Gate mode: When gate held, envelope follows ADS stages. When gate released, R stage begins.
• Trigger mode: When positive edge of gate signal, envelope starts A stage. The envelope continues with the R stage if the gate is released. If the gate is held, the ADS stages will be followed until the gate is released, in which case the R stage is entered immediately.
• For keyboard controllers with retrigger output, you can reset the envelope to the attack phase.
• 6HP Eurorack with our panel

Documentation

Comprehensive documentation, parts lists are provided in the documentation link for building, testing and calibrating the module.

https://www.tindie.com/stores/pmfoundations/

• 28 mA +12V
• 27 mA -12V
• ? mA 5V
• 54 mm Depth

Module is available as a DIY project only.

This Module is currently available.