A versatile dual 8 steps or single 16 steps Sequencer

2 x 8 mode :
- Dual 8 steps sequencer, each sequencer can be set to 1, 2, 3, 4, 5, 6, 7 or 8 steps (with the "stop" switch).
- Every step's gate can be muted ("off" switch)
- 3 voltage ranges : 1v (1 octave), 2v (2 octaves) and Infinite (~10 octaves)
- Controlled by internal clock (~ 20 > 3500 Bpm) or external clock. Sequencer n°2 is slave on Sequencer n°1 if set to "ext clock" and if nothing is plugged into it's clock input jack.
- Manual clock function : "step" push button.
- Pause function for each sequencer.
- Manual reset for each sequencer. Manual or voltage controlled "Reset All" to reset both sequencers.
- "Transpose" voltage control input that can be assigned to one or both sequencers, or none of them.
- Each sequencer has a "Gate Bus", it is a secondary gate pattern that goes out to the "Bus 1" output jack for Sequencer n°1, and to "Bus 2" for Sequencer n°2.

1 x 16 mode :
- When Sequencer n°1 has finished its cycle, it switches to Sequencer n°2, it allows a miximum of 16 steps.
- Each sequencer can play a selectable number of cycles (between 1 and 8) before switching to the other.
- In 1x16 mode, both CVs are summed to "CV1" output, both GATES are summed to GATE 1 output and all GATE BUSES are summed to BUS 1 output. The "STEP" button of Sequencer n°1 acts for both sequencers, as well as the PAUSE button, the transpose switch and the voltage range switch.

Sequencer n°1 and sequencer n°2 can individually be reset manually. They can also be reset together with the "Reset All" button or with an external pulse or trigger.

• 35 mA +12V
• 25 mA -12V
• 0 mA 5V
• 40 mm Depth

This Module is currently available.