Mono audio mixer

Active four-channel mono audio mixer format Eurorack.
- soft diode limiting (on / off by means of a jumper on the printed circuit board), used to limit, adds distortion, "coloring and flattening" the signal.
- LED peak indicator (the level is manually adjusted using a tuning resistor on the printed circuit board, the default value is 1.23Vrms = 4dBu)

Front panel: 2mm aluminum, metallography with crazy design
Potentiometers: Alpha (Logarithm)
Input Impedance: About 47 kOhm
Output Impedance: About 1 kOhm
Depth: 30mm (skiffriendly)
10pin -> 16pin wire included

• 30 mA +12V
• 0 mA -12V
• 0 mA 5V
• 30 mm Depth

This Module is currently available.