drumBs analogue percussion PCB's
The circuitbenders.co.uk drumBs module is a tweaked version of the Syntom II, an analogue percussion project first published nearly four decades ago in the April 1983 edition of the mighty Electronics & Music Maker Magazine.
The drumBs controls are:
DECAY: The decay of the percussion envelope.
BEND: The depth of percussion envelope applied to the pitch of the VCO and the filter cutoff of the noise source.
PITCH: The basic pitch of the VCO.
CUTOFF: The cutoff frequency for the noise filter.
REZ: The resonance of the noise filter.
PULSE: The level of an initial clicking attack at the start of the percussion sound .
MIX: The mix between the oscillator and the noise source.
ROLL: The repeat rate of the auto roll function.
TRIGGER INPUT: The trigger input accepts a standard +5v trigger pulse or gate to trigger the module.
ROLL GATE INPUT: The roll gate input activates the auto roll function whenever it receives a gate or longer trigger voltage. When the auto roll function is activated the module will automatically retrigger itself at a rate set by the roll knob for as long as the voltage is present at the input. This can be very useful for creating unusually timed fills and rolls, although at its highest trigger rate the roll function can sound like a constant VCO tone.
https://www.circuitbenders.co.uk/forsale/drumBs/drumBs.html
Module is available as a DIY project only.
This Module is currently available.
$54