Stereo Filter Frequency Scanner and VCA by kNoB technology

I wanted to create a flexible and powerful tool,
which can mix a large number of signals and process them.
Dragon-FLY is a combined device consisting of two signal processing cells, where each cell consists of an input mixer, a voltage-controlled filter, a voltage-controlled amplifier, as well as control where one signal controls both cells. It can be used in various ways and used in a variety of applications like mixing, filtering, amplification, frequency scanning.
Inside:
- two multi-mode diode-based Sallen-Key 12db/oct filters with constantly available inputs of different types of cut and input attenuators
- two classic OTA VCA with lin and log characteristics
- voltage can control the cutoff frequency, resonance level, VCA gain, pan
- both filters can be controlled by one knob with different modes
User manual in PDF link https://vk.com/doc-67411427_594489540
Demo rev 1.0
https://youtu.be/LKpPzLvjcs0

Revision 1.5
Upgrade instructions https://vk.com/doc-67411427_594538399
In the new revision, we have reworked the filter core:
-Significantly improved work at low frequencies
The operation of the bandpass filter has changed:
-Q factor is directly related to the resonance level
Some changes:
-control voltage range for cutoff frequency and resonance level shifted from 0-10v to 0-5v for better control
All filters of revision 1.0 can be upgraded to version 1.5, for instructions write to us at knobtechnology@gmail.com
Demo rev 1.5
https://youtu.be/BtNTIEWHW4o

For order: write to knobtechnology@gmail.com

• 120 mA +12V
• 70 mA -12V
• 0 mA 5V
• 25 mm Depth

This Module is currently available.