Triple input max min generator with clipper and clamper

The TLN-863 Max Min Generator is a Linear Or/And Gate from Jung's Op-Amp Cookbook. This circuit is very similar to Ken Stone's Analog Logic circuit and Dave Brown's Analogic circuit. With the MODE switch set to the MAX position, the output will be the maximum of inputs 1-3 (Linear Or). With the MODE switch set to the MIN position, the output will be the minimum of inputs 1-3 (Linear And). The THRESHOLD pot sets a voltage that is normalled to the input jacks when no signal is plugged into the jacks. This turns the circuit into a "Clipper" when the MODE switch is set to MIN (output voltage will not go below the THRESHOLD), and a "Clamper" when the MODE switch is set to MAX (output voltage will not exceed the THRESHOLD).

It features two independent channels (A & B) with the following controls:

• THRESHOLD A/B pot: sets the voltage threshold for the Clipper/Clamper feature
• MODE A/B switch: sets the operational mode to Min/And/Clipper or Max/Or/Clamper

Required PCBs are available at SynthCube!
https://synthcube.com/cart/tellun-corporation-diy-pcbs

http://www.tellun.com/motm/diy/tln863/TLN-863.html

• 17 mA +15V
• 17 mA -15V
• 0 mA 5V

Module is available as a DIY project only.

This Module is currently available.