Guitar Stereo Cab Sim / DI

FEATURES AND SPECS

Stereo In and Stereo Out

Stereo Aux Input with Level control

Stereo Cab Sim Level Control

Stereo Headphone Output with 3.5mm and ¼” jacks

Separate LED Level meters and Level controls for each Cabinet

Input Select switch for each Cabinet

ON/OFF Power switch

American/British Speaker

Power Amp Direct-Connect

Selectable 10” or 12” Speaker Size

Selectable VINTAGE (Alnico) or MODERN (Ceramic) Speaker Character

Selectable OPEN BACK or SEALED Cabinet Type

Variable MICROPHONE PLACEMENT Controls to “position” the mic for deep or bright frequency response.

¼” phone jacks INPUT with a direct, un-buffered PASS THROUGH ¼” phone jacks. This effectively splits the signal to feed both a guitar amplifier (the THRU) and a mixing console (one of the outputs, either ¼” phone single ended or XLR balanced)

20db PADs

GROUND LIFTS for Pin 1

Pure Analog Circuit Design using low-noise components

Rugged all-steel chassis with durable powder coat finish

Powered by a single industry standard 12 volt AC Adapter, but runs internally at 18 volts for higher headroom and lower noise

Dimensions:
5.4" (w) x 4.2" (l) x 1.8" (h)

Shipping weight: 2 lbs.

Hand made in California

https://www.adaamps.com/gcs-6

• 137 mm wide
• 107 mm heigh

100 mA / 12 V DC / Negative Center

This Pedal is currently available.

$220