Voltage Circus and Electric Dompteur - h series DIY

Voltage Circus
6 channel voltage mixer, adder and subtractor
Basically an Abacus for control voltages
The Voltage Circus consists of two rows of 3 voltage inputs and outputs that can be chained together.
Voltages can be added , subtracted or offset per channel.
The inputs and outputs are buffered and can be connected with shorting bars.
A switch limits each rom to provide 100% or 33% to the mixer channel to make subtraction possible or prevent clipping.
One use of the hVC is for example transposing of sequences, adding subtle animation to pitch signals or mix wild CVs to provide complex noise sources

The Electric Dompteur is a cloud LFO
One master frequency, set by a knob or an external input is multiplied 8 times
The 8 frequencies can be offset in phase or frequency, always based on the master frequency.
It can go down to 0 Hz and freeze the levels at their preset state
And every output can be adjusted directly at the output without the need for attenuators

Built modules and kits are available right now at :
https://northernlightmodular.com/product/hvc-diy-kit/

Buy the module directly from us for 400EU shipped worldwide or visit a workshop where you can learn how to build them.
Stay tuned and follow us on
www.northernlightmodular.com
https://www.facebook.com/NorthernLightModular

http://northernlightmodular.com/hed-hed/

• 30 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.