Trigger/Gate expansion for the RYO VC Sequencer

Introducing the first official channel expander module for the VC Sequencer, the Trig Xpander.

This will give your VC Sequencer 8 individual outputs for each step outputting either a trigger or a gate, selectable with a jumper on the pcb, and a 9th output that gives you a trigger for each step progression. Also on board is a trimmer for setting the trigger length to your liking.

The outputs are diode isolated, this allows for passive mixing of the outputs using a passive multiple/stackcable/IV cable, or a switched multiple/OR combiner such as the Doepfer A-182 or Low-Gain Shortbus.

The kit comes supplied with two PCBs (as one pcb, user breaks into two), front panel (PCB material), component kit, power/expansion cables and mounting screws.

Will also be available as PCB and/or front panel only option and assembled module.

Basic specifications
Width: 4hp
Depth with power + expansion cable attached: ca 45mm
Power: +mA/-mA

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 45 mm Depth

No info about availability.