Trigger/Gate expansion for the RYO VC Sequencer

Introducing the first official channel expander module for the VC Sequencer, the Trig Xpander.

This will give your VC Sequencer 8 individual outputs for each step outputting either a trigger or a gate, selectable with a jumper on the pcb, and a 9th output that gives you a trigger for each step progression. Also on board is a trimmer for setting the trigger length to your liking.

The outputs are diode isolated, this allows for passive mixing of the outputs using a passive multiple/stackcable/IV cable, or a switched multiple/OR combiner such as the Doepfer A-182 or Low-Gain Shortbus.

The kit comes supplied with two PCBs (as one pcb, user breaks into two), front panel (PCB material), component kit, power and expansion cables and mounting screws.

Will also be available as PCB and/or front panel only option and assembled module.

Basic specifications
Width: 4hp
Depth with power + expansion cable attached: ca 45mm
Power: TBD +mA/ TBD -mA

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 45 mm Depth

No info about availability.