Component to RGB decoder/Luma Processor

Updated version of VU003.

• Converts SD/HD Component (YPbPr) to 1V RGBY outputs.
• Y signal is normalized to the processor input which features an attenuverter (contrast) and offset (brightness), plugging a jack in the processor input will break the normalization to allow processing of another signal than Y.
• Y pass-through RCA at the rear of the module to sync the sync generator/encoder to the external video signal.

Depth indicated is with power cable fitted but without RCA cable plugged in. The module uses a vertical RCA socket at the back, with the tallest RCA we've tested, the total depth is around 70mm, smaller or right angle RCA cable is ideal for shallow eurorack cases.

Inputs:
- 0-700mV YPbPr, 75 ohms, RCA
Outputs:
- 0-1V RGBY, 499 ohms, jack
- 0-700mV Y, 75 ohms, RCA (rear)

• 67 mA +12V
• 41 mA -12V
• 0 mA 5V
• 45 mm Depth

Available as an assembled Module and as a DIY project.

This Module is an early prototype, a concept in development, or an AI mockup