Component to RGB decoder/Luma Processor

Updated version of VU003.

• Converts SD/HD Component (YPbPr) to 1V RGBY outputs.
• Y signal is normalized to the processor input which features an attenuverter (contrast) and offset (brightness), plugging a jack in the processor input will break the normalization to allow the processing of another signal.

• Y pass-through RCA at the rear of the module to sync the sync generator/encoder to the external video signal.

• 45mm deep (DIY) / 20mm deep (Assembled)

(Depth indicated is with power cable fitted but without RCA cable plugged in. A vertical RCA socket is used at the rear of the module, with the tallest RCA we've tested, the total depth is around 70mm, smaller or right angle RCA cable is ideal for shallow eurorack cases.)

Inputs:
- 0-700mV YPbPr, 75 ohm, RCA

Outputs:
- 0-1V RGBY, 499 ohm, jack
- 0-700mV Y, 75 ohm, RCA (rear)

• 67 mA +12V
• 41 mA -12V
• 0 mA 5V
• 45 mm Depth

Available as an assembled Module and as a DIY project.

This Module is an early prototype, a concept in development, or an AI mockup