Coordinated 3 output signal generator

The Spankulator is a WiFi-enabled multi-function Eurorack module. Its main function is to generate a trio of coordinated analog and digital signals called Spanks which can be used in an endless variety of ways; some examples being a sequencer, an envelope generator, or a complex rhythm generator.
FUNCTIONS
• 5 Spank types – Up, Down, Stretch, Toggle and Maytag
• LFO with 3 waveforms – Sine, Ramp Up, Ramp Down
• Reflect – A DVM plus a scalable sample and hold. DC and AC modes
• User Mode – For sending sequences of Spanks and/or LFO bursts
• Settings – For configuration, factory reset, etc.
FEATURES
• 128x64 graphic display enhances usability
• WiFi and Terminal interfaces provide even richer user experiences with the addition of computer resources like a keyboard, display and scripting.
• All settings are stored in Flash memory so that they are retained when power is off
• Selectable Single Shot or Repeat mode
• External Clock mode
• Inputs and Outputs are protected against damage during typical use
SIGNALS
• Gate Out – Digital signal that consists of pulses of varying width.
• Tog Out – Digital signal that toggles with the completion of every Spank.
• CV Out – Analog signal (+/- 5 volt) that depends on the Spank type. Usually, it is relative to the pulse width of the Gate Output. This signal’s amplitude is adjusted using the CV Scale control.
• Trigger In – Digital input. Operation is triggered with a 0 to 5 volt transition on this input. This also serves as the External Clock when Ext Clk mode is enabled.
• Sig In – Analog signal input. Range: +/- 5 volt

https://www.greenfacelabs.com/spankulator/

• 100 mA +12V
• 1 mA -12V
• 0 mA 5V
• 35 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup