Performance comparator

Comparator, but then a bunch more (and sending triggers, instead of gates), with a possibility to sync those to incoming clock. Top, bottom, and 4 up/down states inbetween. 10 outputs.

Lower button toggles quantization to clock on/off.
Top button toggles between modes:

1. RED ? / useful when triggering different sounds per direction
   L1-L6: triggered when moving ↑
   R2-R5: triggered when moving ↓

2. GREEN ? / useful when you want to change the sound depending on direction
   L1-L6: triggered when moving ↑ or ↓
   R2-R5: moving ↑ toggles gate on, moving ↓ toggles gate off.

3. ? / useful for longer duration notes
   L1: gate on at threshold (use this for longer duration notes)
   L6: gate on at threshold
   L2-L5: triggered when moving ↑
   R2-R5: triggered when moving ↓

4. LIGHTBLUE / useful when you want to change the sound depending on direction and speed
   L1-L6: triggered when moving ↑ or ↓
   R5: gate if ↑ velocity above certain threshold
   R4: trigger when direction is ↑
   R3: trigger when direction is ↓
   R2: gate if ↓ velocity above certain threshold

5. PURPLE / useful for shaker sound that triggers with every change of direction
   L1-L6: triggered when moving ↑ or ↓
   R5: gate if velocity above certain threshold
   R4: gate when direction is ↑
   R3: gate when direction is ↓
   R2: trigger when direction changes

• ? mA +12V
• ? mA -12V
• ? mA 5V

Available as an assembled Module and as a DIY project.

This Module is an early prototype, a concept in development, or an AI mockup