A Trigger Controlled Gate.

Dual Latch is a utility module in a 2hp form factor. It is best described as a trigger controlled gate - a trigger sent to a SET input (up arrow) sets the gate (!) output to its high state (on), while a trigger sent to the RESET input (down arrow) sets the gate low (off). The gold up/down arrows are the TOGGLE inputs, for toggling the state of the gate. You get two of these ‘latches’ in a package.

The gates can be used to control anything in your Modular. This module was created to provide a way control the hold/freeze inputs on certain digital modules in a synchronized, rhythmic fashion. It is capable of completing this task as well as much more including frequency division and gate to pulse conversion. It's a digital function generator that can be used alone or in conjunction with a wide range of other modules to add a new layer of control to your Eurorack system.

Typically triggers are sent to the inputs, but they are designed to accept any type of signal and can handle a massive range of frequencies.

Power is reverse polarity protected and uses a 10-pin Eurorack power ribbon. Sold with 2 Doepfer fasteners and a power ribbon.

https://reverb.com/item/11492155-empirical-circuits-dual-latch-deep-purple-pcb-face-plate

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 55 mm Depth

This Module is currently available.