PWR Checker - the most useful 1HP panel :)

PWR checker is perfect solution how to fill 1HP place. You will have information about all power supply voltages in case. PWR checker has 3 green LEDs (+12V, -12V and +5V) on front panel. Module is connected to PSU or distribution board. It is not only simple resistor + LED circuit. PWR checker’s circuit shows presence and dropout of supply voltage. If your PSU work properly, all LEDs should light with same intensity. If voltage of PSU drops more than 1V, LEDs will shut down. It means that PWR checker (in compare with standard resistor + LED circuits) can show little PSU voltages deviations. Voltages deviation can have big influence to function of some modules. Current consumption of PWR checker is 2mA per rail.

www.konstantlab.audio

• 2 mA +12V
• 2 mA -12V
• 2 mA 5V
• 14 mm Depth

This Module is currently available.