PWR Checker - the most useful 1HP panel :)

PWR checker is the perfect solution for how to fill 1HP. It gives you information about all power supply voltages in your case. PWR checker has 3 green LEDs (+12V, -12V and +5V) on front panel, and the module is connected to your PSU or distribution board. It is not only a simple resistor + LED circuit. PWR checker’s circuit shows the presence and dropout of supply voltages. If your PSU is working properly, all LEDs should light with the same intensity. But if the voltage of the PSU drops more than 1V, LEDs will go completely dark. PWR checker (in comparison with standard resistor + LED circuits) can also show little PSU rail voltage deviations which can have a big influence on the function of some modules. Current consumption of PWR checker is 2mA per rail.

www.konstantlab.audio

• 2 mA +12V
• 2 mA -12V
• 2 mA 5V
• 14 mm Depth

This Module is currently available.