Passive reversal of signal routing with attenuator & multiple

The INVERSOR module is a passive utility for instantly reversing two signals, with a confortable slide switch. An attenuator and a dual multiples per channel enrich its use. All signals are accepted.

Principle of operation:
On DEF mode :
Signal A in connector IN 1 -> OUT's 1 (pre and post attenuator available, with multiple for post)
Signal B in connector IN 2 -> OUT's 2 (pre and post attenuator available, with multiple for post)
Bicolore led's indicate the selected mode.

If you switch on (INV) mode:
The signal A in connector IN 1 is routing to OUT's 2 (pre and post attenuator available, with multiple for post) &
The signal B in connector IN 2 is routing to OUT's 1 (pre and post attenuator available, with multiple for post)
Bicolore led's indicate the selected mode.

Example of use:
I leave it to you to imagine the multiple possible uses of this module

http://ph.neutre.free.fr/Inversor_En.htm

• 4 mA +12V
• 0 mA -12V
• 0 mA 5V
• 25 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup