Passive reversal of signal routing with attenuator & multiple

The INVERSOR module is a passive utility for instantly reversing two signals, with a comfortable slide switch. An attenuator and a double multiple per channel enrich its use. All signals are accepted.

Principle of operation:
In DEF mode:
Signal A in the connector IN 1 -> OUT 1 (pre and post attenuator available, with several for post)
Signal B in the connector IN 2 -> OUT 2 (pre and post attenuator available, with several for post)
The two-color LEDs indicate the selected mode.

If you activate (INV) mode:
Signal A from connector IN 1 is routed to outputs OUT 2 (pre and post attenuator available, several for post) &
Signal B from connector IN 2 is routed to OUT 1 (pre and post attenuator available, with several for post)
The two-color LEDs indicate the selected mode.
Example of use:
I leave it to you to imagine the multiple possible uses of this module

http://ph.neutre.free.fr/Inversor_En.htm

• 4 mA +12V
• 0 mA -12V
• 0 mA 5V
• 25 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup